Chapter 2
TECHNICAL INFORMATIONS
-
6
-
English
C22
4151
100.fm
ID
M
2.4.
WORKING CYCLE
Step 1
- The machine is moved toward the load man-
ually, so that the sensing arm wheel comes in contact
with the pallet.
Step 2
- Upon starting the cycle, the machine rotates
around the load clockwise, while the spool carriage un-
wraps the film according to the pre-set parameters.
Phase 3
- once the wrapping has been completed, the
machine manually cuts the film and stops.
2.5.
SAFETY DEVICES
The figure shows the positioning of the
devices on board of the machine.
A) Emergency bumper
: equipped with
safety micro-switches to stop the
machine automatically in the event
that it is accidentally hit.
B) Emergency stop button
: if
activated, all machine parts stop
immediately. After resetting the
operating conditions, release the
button with a voluntary action in
order to enable the machine
operation.
C) Blinking light (orange)
: signals that
the machine is moving.
D) Acoustic signal
: signals the start of
the wrapping cycle.
E) Mechanical device for blocking
the reel carriage
: it stops the reel
carriage falling in the event that the
lifting rope breaks.
IDM-24126600400.tif
C
B
D
A
E
IDM-24126602300.tif
1
2
3
