Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller
Back to Top
User Manual v4.05 – Page 5
Robo-Tanks Features
16 Channels For Controlling LED's
o
12-Bit PWM signal 0-5v (0-100%)
o
4095 steps for very smooth dimming
o
Control all 16 channels independently
o
Display adjustment sliders have a low setting so you can fine tune the low end of your LED's
o
Customize display adjustment slider colors to match your LED's, never forget what color is on any given
channel
o
Channel 9 – 16 can be used for dosing pump stirrers and other equipment in the future.
5 Lighting Modes
o
Low sun, mid sun, high sun and moon modes are cycled through each day
o
Temporary lighting mode for bypassing regular lighting schedule
o
View current light mode on home screen and time remaining during transitions
o
Cycle 24 hour light schedules In 1 minute to view a full day
o
Turn lunar mode on/off, It adjusts moon light to moon size
o
6 different daily transitions
Moon to Low Sun
Low Sun to Mid Sun
Mid Sun to High Sun
High Sun to Mid Sun
Mid Sun to Low Sun
Low Sun to Moon
Control Eight 12v DC Dosing Pumps (any voltage dosing pump will work just need to adjust voltage to match
using DC-DC converter)
o
Automatic or manual control of each pump, mix and match
o
Set dose amount in milliliters for each pump
o
Set pump rate for each pump in milliseconds per milliliters, this allows easy calibration for each pump
o
Set reservoir capacity for each pump
o
View total doses remaining with each reservoir on home screen
o
Reservoirs on display are colored inside to reflect amount remaining in reservoir
o
Pumps won't run when reservoir is empty
o
Maximum reservoir size: 2.5L or 250 doses per pump
o
Dose between 1ml - 250ml
o
Schedule up to 10 doses per day for each pump
o
Each scheduled can be set to run any or all days of the week
o
Dose with any pump using custom rules
o
Customize fertilizer name for each dosing pump, up to 13 characters long
Control 8 Magnetic Stirrers
o
Turn 8 LED channels (9-16) into controls for magnetic stirrers
o
Automatically control stirrer before dosing pump runs
Control 16 AC Power Outlets
o
Automatic or manual control of each outlet, mix and match
o
Turn on/off all AC outlets with single button
o
Manually change AC outlets and resume to regular schedule with single button
o
View current status for each AC outlet on home screen
o
Change icon for each outlet so you remember what's plugged In and where
o
Any 3 outlets can be used to control water heaters/any AC equipment using the water temperature
