Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller
Back to Top
User Manual v4.05 – Page 32
Scheduling the AC Power Outlets
From the Home screen, press: Settings > Schedules
> Power, and you see the screen to the left, the
POWER SCHEDULE screen.
Each icon, on the left, represents 16 different
outlets.
To setup or change one, press the one you wish to
setup or change and it will take you to the POWER
SCHEDULE screen, below, for that pump.
This is a list of all the schedules for the selected
outlet, in this case for Outlet 4 – Air Pump.
Here you can configure up to 10 schedules for this
outlet. A schedule can be set for any time of the
day and day of the week to run. Any day column
that has an X, verifies a schedule is set and will run
at that given time on that given day.
If a schedule number has no X under any of the
days that schedule is disabled and won’t run at the
time shown.
These schedules don’t need to be in order, for
example schedule 1 could be set to run a 4pm and
schedule 2 could be set for 11am it won’t make any difference.
To setup a new schedule press any of the 10 rows and you’ll go to the screen below, where you can set the time the
schedule runs and which days to run it on.
On this screen, in this case for Outlet 4 Air Pump -
Schedule 5, you setup/adjust what time, and which
days of the week the schedule will run.
Then on the right side press ON and it’ll change to
OFF, select the action you want to occur when the
schedule runs.
To disable this schedule for this outlet, simply
uncheck all the days of the week.
