Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller
Back to Top
User Manual v4.05 – Page 20
Scheduling the Dosing Pumps
From the Home screen press: Settings > Schedules
> Dosing, and you will see the DOSING SCHEDULE
screen to the left, where you can change the
schedule for each of the dosing pumps.
Each icon, on the left, represents 8 different dosing
pumps/reservoirs.
To setup or change one, press the one you wish to
setup or change and it will take you to the DOSING
SCHEDULE screen, below, for that pump.
This is a list of all the schedules for the selected
dosing pump, in this case Dosing Pump 1 –
Conditioner. * This is a custom label, and can be
defined by you to display what you are dosing – see
Setting Custom Labels – Pg. 39
Here you can configure up to 10 schedules for this
dosing pump. A schedule can be set for any time of
the day and day of the week to run. Any day
column that have an X, verifies a schedule is set
and will run at that given time on that given day.
If a schedule number has no X under any of the
days that schedule is disabled and won’t run at the
time shown.
These schedules don’t need to be in order, for example schedule 1 could be set to run a 4pm and schedule 2 could be set
for 11am it won’t make any difference.
To setup a new schedule press any of the 10 rows and you’ll go to the screen below, where you can set the time the
schedule runs and which days to run it on.
On this screen, in this case for Dosing Pump 1 –
Conditioner - Schedule 5, you setup/adjust what
time, and which days of the week, to dose.
To disable this schedule for this dosing pump,
simply uncheck all the days of the week.
