Robo-Tank Basic Скачать руководство пользователя | Manualshive

Страница: 37 / 70

background image

Robo-Tank DIY All-In-One Aquarium Controller User Manual

Robo-Tank DIY All-In-One Aquarium Controller

Back to Top

User Manual v4.05 – Page 35

Adjusting the LED Intensity for the Storm

Press: Cloud Target, on the screen above you get the
screen  on  the  left,  LIGHTNING  STORM  MODE.
When the screen loads the LED’s will automatically
go  to  the  intensity  selected  in  this  window.  This
allows you to see the light level you’re adjusting to.
When you exit the screen the LED’s resume to their
normal levels.

Adjust until you’re satisfied with the look you want
for your aquarium when a storm runs. If the lights
are in LOW SUN, MID SUN, or HIGH SUN mode they
will transition to the levels selected here, if the lights
are in NIGHT mode the lights will not transition, they
will  remain  at  the  levels  selected  for  the  NIGHT

mode.

Customizing the Lightning Storm

If you press: Customize, on the main Storm Settings
screen  you  get  the  screen  on  the  left,  WEATHER
SETTINGS. Here you adjust how the lightning flashes
and how long the cloud over and clear lasts.

In  the  first  column  we  have  Lightning  Strike
Intensity which allows you to adjust the brightness
of the flashes. The +1, +2, +3 and +4 are multipliers
for the number. +4 at 255 is the highest setting, +1
at 0 is the lowest. The controller randomly selects a
number between the two for the flash intensity so
it’s always different.

The next column is for adjusting the Time between

Lightning Strikes, there are two settings, a low and high, the controller randomly chooses between the two numbers.

The final column is for adjusting the Cloud Duration, this is how long it takes to transition to the storm brightness and then
return to the regular lighting schedule after the lightning is over. Again there’s a low and high setting, the controller will
choose a random time between the two settings.

*Note: If you change the options during a storm you won’t see any difference, you must stop and re-start the storm for them
to take effect.

«
...
35
36
37
38
39
...
»

Содержание Basic







































































Отзывы:

Нет отзывов

Похожие инструкции для Basic

Бренд: D+H Страницы: 36

Бренд: D-Box Страницы: 4

Бренд: D+H Страницы: 36

Бренд: Samson Страницы: 48

BT300 BurnerTronic

Бренд: Lamtec Страницы: 48

Бренд: Parker Страницы: 32

Бренд: Rayrun Страницы: 4

AeGIS 7000 Series

Бренд: PACH & COMPANY Страницы: 2

Z3-DM8107-SDI-RPS

Бренд: Z3 Technology Страницы: 73

Бренд: Z-Wave Страницы: 14

Бренд: Z-Wave.Me Страницы: 4

Бренд: Balboa Water Group Страницы: 88

Бренд: ABB Страницы: 2

Бренд: National Instruments Страницы: 17

Бренд: Davey Страницы: 12

infi 90 IMMFP12

Бренд: Bailey Страницы: 75

iSteam 2.0 Control

Бренд: mr. steam Страницы: 16

Бренд: Sygonix Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды