Robland Z400 EL, Руководство пользователя

Страница: 32 / 72

32
V0119 Z400-serie
English Deutsch
Fig.40 Fig.41
4. Lining of the telescopic arm.
It is possible to set the telescopic arm in relation to the crosscut table through 3 socket screws.
Place the telescopic arm perpendicular (90°) to the sliding table. Use a straight ruler and measure the
height from the crosscut bar to the ruler (beginning and end of the bar). These heights must be the
same. Now turn the telescopic arm close to the frame and measure again, this needs to be the same
heights as well.
Fig.42
Fig.43 Fig.44 Fig.45