Robland Z400 EL, Руководство пользователя

Страница: 18 / 72

18
V0119 Z400-serie
English Deutsch
Replace the value on the display by the mesured
value - for instance. 99,3 – and confirm the
corrected value. Press the symbool to move the parallel fence to
the corrected value.
Saw another piece of wood and check the
measured value.
Changing main sawblade and scorer
sawblade
(Fig.8-8B-9)
Warning: Before changing sawblades always turn off the main switch.
Handle sawblades with care, to avoid serious cuts and injuries.
Push the sliding table to the rear and open the saw cover. Raise the main sawblade to its highest
position and put the key(2) into the saw spindle nut.
Put the locking pin in the opening of the saw table and turn the spindle with the key (3) until the
locking pin (2) engages in the hole in the saw spindle pulley.
Now unlock the nut (1). Before fitting the new sawblade ensure the blade and flanges are clean. This
prevents wobbling of the sawblade.
Never forget, after the saw spindle nut has been tightened, to remove the locking pin from the pulley
before starting up the motor.