Robinson Polytunnels 10ft Wide Polytunnel, Руководство по сборке и инструкция

Страница: 16 / 28

10ft Wide Polytunnel Assembly Instructions
Copyright © Robinson Polytunnels 2009 - 2018
16
10. FITTING THE ANTI HOT SPOT TAPE
1 The Anti Hot Spot Tape is applied to the hoops of the polytunnel where
the polythene would touch.
2 Starting just above the A20 fitting on the Foundation Tube, place the
Anti Hot Spot Tape on the outside face of the hoop. On the inner hoops
the tape should be central on the tube. On the end hoops the tape
should be on the “corner” of the tube.
Tip! Don’t fit the Anti Hot Spot Tape until you’re
ready to sheet – it may get damaged if the
weather is wet and windy.
3 Tape over any sharp edges, bolt heads and metal faces that the polythene may come into contact with.