Roberts Gorden Combat MGB0100, Руководство по установке

Страница: 13 / 92

SECTION 3: C
RITICAL
C
ONSIDERATIONS
7 of 85
3.6 Electrical Supply
A permanent 230 V, 50 Hz, 1 Ø is req u ired on
models 15 to 30 and 400 V, 50 Hz, 3 Ø and ne u tral
req u ired on models 40 to 100 (special v ersion MGB
and MOB 040 and 050 models are a v ailable as belt
dri v e). The heater also req u ires s u itable energy
controls in accordance w ith Page 27, Section 9 .
ON/OFF control, temperat u re control, time control,
and frost protection are a v ailable as a remote
control, w hich needs to be site w ired for proper
operation of the heater. Alternati v ely, any remote
energy controls may be u sed w hich m u st be w ired in
accordance w ith Page 28, Section 9.3 through Page
39, Section 9.14 .
3.7 Flue
Choose heater siting to allo w for the proper location
of the fl u e. Each heater m u st be fitted w ith an
indi v id u al and correctly sized sealed fl u e system.
See Page 17, Section 6 .
No other appliance may be connected to the fl u e.
For room sealed installation, the air intake m u st be
the same size sealed system and the fl u e/air intake
m u st terminate at an appro v ed concentric w all or
roof terminal.
DANGER
Electrical Shock Hazard
Disconnect electric before service.
Heater must be properly grounded.
Failure to follow these instructions can result
in death or electrical shock.