RMS-Robe Media Server
81
Now adjust the picture in such a way that the red crosses will be
(
approximately) in the centres of
the ArcDots. To reach this aligning , follow the points :
1.
Set the global keystone channels 2-9 at DMX value of 128.
2.
Use the channels
Gobo zoom X coarse
and
Gobo zoom Y coarse
at digital layer (from which
the test picture is projected) to adjust size of the test picture.
3.
Set the channel
Global effect 1
at DMX=21 and use its parameters to adjust ArcDots on control
signs (red crosses):
Global effect 1-Parameter 1
– zoom of the test picture (default=0 DMX)
Global effect 1-Parameter 2
– movement in X-axis (default=128 DMX)
Global effect 1-Parameter 3
– movement in Y-axis (default=128 DMX)
Properly adjusted test picture 1 on the monitor:
After adjusting the test picture, press the [ENTER] and the following message will appear on the
screen
Содержание DT Series
Страница 1: ...Version 1 4 ...