RMS-Robe Media Server
85
28. Maintenance
28.1 Installing the DVI/VGA
(
SDI/ASI ) capture card
To install the optional DVI/VGA (SDI/ASI) capture card.
1.
Disconnect the fixture from power.
2
. Remove top cover (1) of the fixture by unscrewing two screws (2).
3
. Remove the metal plate (3) by unscrewing two screws (4).
4
. Remove the graphic card (5) from the slots and install the new one.
5
. Screw the metal plate (3) and top cover (1) back to the chassis.
28.2 Cleaning the air filter
Important! Check the air filter periodically and clean before it becomes clogged!
Clean the air filter with a vacuum cleaner or you can wash it and put back dry.
Replacing the air filter in the front cover
1.
Disconnect the fixture from power.
2.
Unscrew 4 screws at the sides of the cover.
3.
Remove securing grid and pull the air filter out.
4.
Clean or replace the air filter .
5.
Put the filter back and secure it with the grid.
6.
Screw the grid back to the cover
We recommend avoiding dusty/smoky environments when operating the fixture.
Содержание DT Series
Страница 1: ...Version 1 4 ...