RMS-Robe Media Server
20
Procedure:
1. Select the program you want to edit (“Program 1” - “Program 10”) and press the [ENTER] button.
2. Select “Edit Steps” menu and press [ENTER] button.
3. Select the desired program step (“Step 01” - “Step 99”) and press [ENTER] button.
4. Select the desired item and press the [ENTER] button. Now you can edit a DMX value of selected item by the
[RNS] encoder wheel
5. Press the [ENTER] to save adjusted value.
6. Select another effects (channels) and repeat steps 4 an 5.
7. Select “Save” or “Save and Copy” and press the [Enter] to confirm all adjusted values in a current step:
“Save” -
saves the current prog. step
“Save and Copy” -
saves and copies the current prog. step to the next prog. step.
Option
“Snap DMX”-
inserts current values from DMX to all effects (channels). It is very useful function, you don
not have to adjust all effects to desired positions, all values are loaded from DMX.
8. Go to the next prog. step ,press the [ENTER] and repeat this procedure (steps 4 and 7).
After creation of the program, you can simply reduced its length (by changing the start/end step) using either the
“
Start Step
” item or the “
End Step
” item.
Play DMX Program
--- Select this menu to run one of 10 programs which have been recorded via the menu
“Record DMX program”
. By pressing the [ENTER] you can switch the running program into the 3 following modes:
Pause, Playing, Playing in Loop. The current program step is shown on the fixture display:
Record DMX Program
--- The menu allows to record DMX data that receives the fixture and then replay them again
via the menu
“Play DMX program”
. There is a list of 10 programs for recording with unlimited steps each.
Select desired program number and press the [ENTER] to enter the recording screen.
The data record starts after changing any receiving DMX value. To stop recording, press [ENTER] or [ESC].
Recorded DMX program has the name
dprg_xx.csv
where the xx means the number of the program (e.g.
dpr_01.csv, dprg_02.csv....) and is stored in the folder “Programs” accessible by means of FTP. The format of this
file is a plain text that allows additional user editing. The first line of the file includes all DMX channels with their
starting DMX values and the next lines display changes of DMX values of channel effect and a relevant time of the
changes.
Note: If you select the program which contains previously recorded data, the data will be overwritten without
warning.
Preset playback
--- The menu allows to select a program (or a DMX program), which will be played automatically in
a loop after switching the fixture on.
Fixture Off Timer
--- The menu offers to control the time during which the fixture is on and, for example, plays the
recorded program. The adjusted time period is counted from starting the fixture.
Deactivated Timer
--- The item disables the “Fixture Off Timer” option.
Set Timer Hours
--- The item enables to set hours for the “Fixture Off Timer”.
Содержание DT Series
Страница 1: ...Version 1 4 ...
