![Robe DT Series Скачать руководство пользователя страница 76](http://html.mh-extra.com/html/robe/dt-series/dt-series_user-manual_1468877076.webp)
RMS-Robe Media Server
76
26. Pixel mapping
The item "
Pixel Mapping
“ in the main menu serves for pixel mapping of the Anolis ArcDots orArcPixes used in large
scale matrix applications.
There is an example how to use this menu to map ArcDots matrix of 8x8 (the same rules are true for ArcPixes if not
stated in a different way).
1.
Connect all fixtures as shown on the picture below. In this example, the Robe Media Server and the
ArcPixPower are interconnected via ArtNet. The monitor should be connected to the Master VGA output.
2.
Set desired IP address of the ArcPixPower and its DMX has to be set at 1, its universes should be different
to the universe of the Robe Media Server. Run the functions “Search Dots“ (Dots—>Search Dots) and
“Auto Sort“ (Dots—>Auto Sort) in the menu of the ArcPixPower to check if all connected ArcDots were
detected by the ArcPixPower. Save found values by the “Store Config“ function .
Note: If you use more than one ArcPixPower, set their DMX addresses to 1, but ArtNet Universes have to
be different for each driver.
3.
Go to the menu “
Pixel Mapping
“ of the Robe Media Server and select configuration mode (e.g.
PM Config
1
).
Содержание DT Series
Страница 1: ...Version 1 4 ...