Robe ColorSpot 575E AT, Руководство пользователя

Страница: 7 / 39

7
4.2 Lamp adjustment
The ColorSpot 575E AT lamp holder is aligned at the factory. Due to differences between lamps, fine adjustment
may improve light performance.
Strike the lamp,open the shutter and the iris,set the dimmer intensity onto 100% and focus the light on a flat
surface (wall).Center a hot-spot(the brightest part of the image) by using the 3 adjustment screws "
A,B,C ".Turn
one screw after another a quarter-turn clokwise(counter-clokwise) to set the hot-spot in the center of the image.If
you cannot detect the hot-spot,adjust the lamp until the light is evenly distributed.
4.3 Inserting/Exchanging colours and gobos
DANGER!
Install the colours gobos with the device switched off only.
Unplug from mains before!
If you wish to use other forms and patterns as the standard gobos, or if colours are to be exchanged, open the top
cover of the head by loosening 4 quarter-turn fasteners on the top cover.
Colour wheel:
Gently bend out the colour module to release it from the 3 distance slots and eject it from the pressing snap.
Put the new colour module back under the pressing snap and push it to the distance slots.
3 adjustment screws "A,B,C"
colour-module
pressing snap
distance slot