Roach Conveyors 450BOS, Руководство пользователя

Страница: 12 / 40

BELT PATH
ILLUSTRATION FOR UNITS WITH END DRIVE
ILLUSTRATION FOR UNITS WITH CENTER DRIVE
If pulleys are adjusted during installation or mainte-
nance, it is crucial that nip point guard (at drive end)
is readjusted. See detail “A” above. Note: Nip point
guard on take-up end is automatically adjusted when
take-up pulley is adjusted.
If pulleys are adjusted during installation or mainte-
nance, it is crucial that nip point guards (at both ends
of conveyor) are readjusted. See detail “B” above.
Center drive guards MUST be replaced after installa-
tion or maintenance.
 FLOW 
 FLOW
12