Roach Conveyors 450BOS, Руководство пользователя

Страница: 38 / 40

MODEL BFCD CHAIN DRIVEN FEEDER
PARTS LIST FOR FEEDER (WHEN USED WITH CENTER DRIVE)
Item
#
Description
Item
#
Description
2’ & 3’ Feeder Assembly 32 3/8” x 1-1/4” carriage bolt
1 196S roller assembly 33 3/8” x 1-1/2” carriage bolt
2 4’ O.D. drive pulley assembly 34 5/16” - 18 flange nut
3 4’ O.D. Idler pulley assembly 35 5/16” flat washer
4 Chain guard assembly 36 5/16” - 18 nylon insert locknut
5 Belt kits w/assembly instructions 37 3/8” hex nut
6 Frame crossbrace 38 3/8” nylon insert flange nut
7 1.9 roller keeper 39 5/8” - 11 hex nut
8 Filler pan 40 Bearing guide spacer
9 Bolt-in butt coupling 41 #50 chain
10 Bearing take-up mounting angle 42 #50 connector link
11 4” end take-up filler pan 43 Sprocket 1/3/16” bore
12 Bearing push plate 4’ through 10’ Feeder Assembly
13 Take-up bering guide 44 Pivot mounting angle left hand
14 Feeder side channel left hand 45 Pivot mounting angle right hand
15 Feeder side channel right hand 46 Pivot mounting plate
16 Pivot mounting angle left hand 47 1/4” SQ x 7/8” long keystock
17 Pivot mounting angle right hand 48 Chain guard assembly
18 Pivot mounting plate 49 Belt kits w/assembly instructions
19 Bed pan brace channel 50 3/8” x 3/4” long HHCS
20 5/8” dia. take-up rod x 6” long 51 3/8” x 1-1/4’ long HHCS
21 1/4” SQ x 7/8” long keystock 52 3/8” x 3/4” long carriage bolt
22 Safety pop-out roller assembly 53 3/8” nylon insert flange nut
23 2 hole flange bearing 1-3/16” bore 54 #50 chain
24 1.19” bore milled take-up bearing right hand 55 #50 connector link
25 1.19” bore milled take-up bearing left hand 56 Sprocket 1-3/16” bore
26 5/16” - 18 x 2” hex flange HHCS 57 4” end take-up assembly
27 3/8” x 3/4” long HHCS 58 4” end drive assembly
28 3/8” x 1-1/4” long HHCS 59 700SB intermediate bed section
29 3/8” x 3-1/2” long HHTB 60 Squaring rod (short) (796RB)
30 5/16” x 3/4” carriage bolt 61 Squaring rod (long) (796RB)
31 3/8” x 3/4” long carriage bolt 62 Turnbuckle (796RB only)
38