1 4 |
P a g e
LTW-4 Controllers
LTW-4
Series
LTW-H4
Series
Simplistic in operation, these systems feature a tri-colour
LED that indicating system status and a 4-digit display to
indicate lamp life remaining. Pressing the button will change
the display to indicate total running time. When the UV lamp
is on and within its operating age, the LED will be green.
When the UV lamp is not on or the lamp life has expired,
the LED will be illuminated red and an audible buzzer will be
sounding. To remedy this condition, the UV lamp must be
replaced with a new genuine LIGHTWAVE UV lamp.
LTW-5/6 Controllers
LTW-5
Series
LTW-H5
Series
A full colour LCD screen provides the user with a detailed
description of the system’s performance in addition
to providing any applicable fault messages and system
diagnostics. LTW-5 controllers include an “infinite
expandability port” located on the right side of the
controller. Simply plug in an optional UV sensor module into
the expandability port of a LTW-5 controller and the system
will now monitor the UV intensity of the system!
LTW-5/6 Power-up Sequence
On start up, the controller will run through a diagnostic start-up and the sequence will be
displayed as follows on the colour LCD:
Next, the controller checks for and initializes any optional modules that may be attached to the
system.
Optional Modules Check
- UV Sensor
- Solenoid
- 4-20 mA
- WIFI
- Remote Alarm
- Flow Meter
OR
