manualshive.com logo in svg

RME Audio MADIface XT, Руководство пользователя

Поделиться
Скачать
RME Audio MADIface XT Скачать руководство пользователя страница 12

 

 
12                            

User's Guide MADIface XT

 © RME

 

 

6. Hardware, Driver and Firmware Installation 

 

6.1 Driver Installation 

 
To simplify installation it is recommended to first install the drivers before the card is connected 
to the computer. But it will also work the other way round. 
 
Insert the RME Driver CD into your CD-ROM drive. The driver installer is located in the directory 
 

\HDSPe FX

 for external PCI Express 

 

\MADIface_USB

 for USB 3 and USB 2.0 

 
Start 

rmeinstaller.exe

 and follow the instructions of the installer. After installation connect com-

puter and XT using a USB 2, USB 3.0 or external PCI Express cable. Windows detects the new 
hardware as 

MADIface XT

 and installs the drivers automatically. 

 
After a reboot, the icons of TotalMix FX and Settings dialog appear 
in the notification area.

 

 

Driver Updates

 do not require to remove the existing drivers. Simply install the new driver over 

the existing one. 
 
 

6.2 De-Installing the Drivers 

 
A de-installation of the driver files is not necessary – and not supported by Windows anyway. 
Thanks to full Plug & Play support, the driver files will not be loaded after the hardware has 
been removed. If desired these files can then be deleted manually. 
 
Unfortunately Windows Plug & Play methods do not cover the additional autorun entries of To-
talMix, the Settings dialog, and the registration of the ASIO driver. Those entries can be re-
moved from the registry through a software de-installation request. This request can be found 
(like all de-installation entries) in 

Control Panel, Software

. Click on the entry 'RME HDSPe FX 

(WDM)' or 'RME MADIface USB'. 
. 
 

6.3 Firmware Update 

 
The Flash Update Tool updates the MADIface XT to the latest firmware version. It requires an 
already installed driver. 
 
Start the program 

hdspe_fx_fut.exe

 (PCI) or 

fut_mfusb.exe

 (USB). The Flash Update Tool 

displays the current revision of the MADIface XT and whether it needs an update or not. If so, 
then please press the 'Update' button. A progress bar will indicate when the flash process is 
finished. The bar moves slowly first (program), then faster (verify). 
 
After the update the MADIface XT needs to be reset. This is done by powering down the XT for 
a few seconds. A reboot of the computer is not necessary. 
 
To reduce the time needed for the flash process the tool updates only the parts of the firmware 
that are present in a newer version. The option 

Flash All

 forces the tool to update all parts. 

 
When the update fails (status: failure), the card's second BIOS will be used from the next cold 
boot on (Secure BIOS Technology). Therefore the card stays fully functional. The flash process 
should then be tried again on a different computer. 
 

Содержание MADIface XT















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды