8.1.6. Inverting the Phase of an Analog Input Signal
The phase of analog input signals can be inverted at the input.
The setting persists even if the input source is toggled between XLR and TRS.
To toggle the phase of an input signal
1. Use the button next to the corresponding input to access its settings.
2.
On a combined XLR/TRS input:
press the
third
button twice in quick succession (double press).
3.
On an XLR input:
press the
second
button
once to access phase and AutoSet settings.
4. Press the
second
button
Ø
to invert the phase. It turns yellow when active.
5. Return to the input settings and verify that the Ø sign is shown next to the gain knob.
To invert phase of an analog input:
1. In the web remote, open the analog input port. Each input is represented with a channel strip.
2. Invert the phase using the
Ø
button in the corresponding channel strip.
8.1.7. AutoSet
AutoSet
automatically reduces the gain when an input signal exceeds -6 dBFS. It can be set for each
input channel individually. When using gain groups, AutoSet can be activated either for the entire group,
or only for some channels. Only channels with activated AutoSet will be monitored to maintain the 6 dB
headroom, but the resulting gain reduction will affect all channels of the gain group.
Gain offsets within a gain group are maintained as long as possible. If a participating
channel reaches minimum gain, it remains at minimum gain while other channels continue
to be reduced.
The AutoSet feature is very useful during sound checks or rehearsals. Simply set a very high gain and
RME 12Mic-D User’s Guide
8.1. Analog Inputs |
54
Содержание 12Mic-D
Страница 2: ...RME 12Mic D User s Guide...
