9. OUTPUT Section
The output section represents the internal routing matrix and state of the outputs. Routing is performed
by selecting an output and assigning any input to it. When a routing is active, its input is automatically
monitored for lock and sync in the input section.
Example:
In the
OUTPUT
section,
MADI Optical 1-12
is chosen as source for
Dante® channel 1-12
.
The 12Mic-D is clock master, but the incoming MADI signal is not correctly synchronized. This causes a
warning in the
INPUT
section. If
MADI Optical
is not routed to any output, an invalid or missing signal
does not cause a warning.
Use the web remote to find out quickly which outputs are receiving a specific input signal.
The web remote provides a thorough representation of all active routing connections at a
glance.
Device Output Section
Within the output section of the device, each output port has individual tabs for configuration and
routing. The routing is shown per output channel, it is therefore necessary to browse through the
channels to see the current routing.
Access the output section by pressing the encoder once from the main screen, and then
rotate it to highlight OUTPUT. Confirm again with an encoder press.
RME 12Mic-D User’s Guide
9. OUTPUT Section |
64
Содержание 12Mic-D
Страница 2: ...RME 12Mic D User s Guide...
