When the device is idle (main screen):
1. Press and hold the first button at the first input. The channel is selected as the first channel in a
group.
2. While holding down the first button, press a second button at another input. All inputs in-between will
be added to the group. Release the buttons and adjust gain as required.
Channels that participate in the current group are shown with full color level meters and
connecting lines to the encoder icon (refer picture above). Channels that do not
participate in the group have grey level meters and are not connected.
3. Hold down the third button
+
and press input buttons to add or remove individual channels from the
group.
When the first input channel is currently selected:
1. Press and hold the third button
+
. The button turns green and an instruction is shown.
2. Press a second button at another input. The new gain group is displayed and allows adding further
channels.
[{211 9T 3}] |
{211-9T-3}
1. In the web remote, open the analog input port. Each input is represented with a channel strip. Note
that each channel strip becomes highlighted when the cursor hovers over it.
2. Click or tap the first channel strip (avoiding the control buttons and encoder), and then swipe
sideways to select a range of channels. The selected channels get highlighted in blue.
3. Click or tap on individual strips to add or remove them from the selection.
4. Use the additional gain knob floating below the selected channels to adjust the gain for all channels.
8.1.11. Saving, Using and Deleting Gain Groups
A temporary gain group can be saved.
RME 12Mic-D User’s Guide
8.1. Analog Inputs |
58
Содержание 12Mic-D
Страница 2: ...RME 12Mic D User s Guide...
