7.4. Remote Control Overview
The 12Mic-D can be remote controlled. Remote control is activated by default and is not affected by
preset changes or device lock.
The remote control protocols are not protected against malicious use. When activated, the
remote control server allows anyone on the network to make changes to the configuration
of the device. To limit access, secure the network that the device is connected to.
7.4.1. Finding the Device on a Network
The 12Mic-D has three integrated network adapters (USB 2.0 and dual ethernet).
The adapters can be used, individually or simultaneously, to control the device with HTTP ("web remote").
The web remote control works on any IP-based network, including wireless networks.
To enable web remote functionality over HTTP:
1. Open the
remote
tab in the
STATE
section. To enter the State section press the encoder twice while
in the main screen, then select the remote tab.
2. Ensure that the
HTTP Remote
setting is switched to
ON
.
USB
When the device is connected with a USB 2.0 cable to a Apple macOS™ or Microsoft Windows™
computer, a network device is automatically installed in the background that assigns the 12Mic-D the
following IP address:
Only
one
of the following products can be connected to the host computer via USB at a
time: RME M-32 AD Pro, M-32 DA Pro, 12Mic, 12Mic-D, AVB Tool, M-1610 Pro.
Ethernet
The integrated ethernet adapter will join an IP network when connected. If no DHCP server is found, for
example when connecting the 12Mic-D directly to a computer, an address is automatically self-assigned
(in the 169.254.0.0/16 subnet).
To find out the current IP address:
1. Open the
remote
tab in the
STATE
section. To enter the State section press the encoder twice while
in the main screen, then select the remote tab.
RME 12Mic-D User’s Guide
7.4. Remote Control Overview |
38
Содержание 12Mic-D
Страница 2: ...RME 12Mic D User s Guide...
