RME Audio 12Mic-D страница 14 Скачать руководство пользователя

Страница: 14 / 85

3.4. Standby Switch

The front panel encoder acts as a standby switch. While in standby mode, the device is completely
powered down except for a red LED. No signals are processed or passed on.

Possible actions:

• When the device is in standby mode, pushing the encoder

for two seconds

will boot the device.

• When the device is powered on, push and hold the encoder for several seconds in order to power

down the device. A red progress bar is shown while the encoder is pushed.

3.5. Standby Indicator

The following illumination patterns are possible:

No illumination

• There is no power at either of the two power inlets.

• The power switch at the rear of the device is set to 'Off'.

• Dark mode has been activated.

Permanent red illumination

• The device is

powered off

but is receiving power at either one of the power inlets.

Permanent white illumination

• The device is

powered on

and all systems are working without warning.

Alternating red/white illumination

• Something is not working properly. This is triggered when one of the four display

sections:

STATE, INPUT, OUTPUT, or CLOCK

signals a

warning

RME 12Mic-D User’s Guide

| 3.4. Standby Switch

Содержание 12Mic-D






















































































Результаты поиска

Содержание 12Mic-D

Отзывы:

Похожие инструкции для 12Mic-D

Бренды по названию

Популярные бренды

RME Audio 12Mic-D, Руководство пользователя

Результаты поиска

Содержание 12Mic-D

Отзывы:

Похожие инструкции для 12Mic-D

Бренды по названию

Популярные бренды