EAGLE 2 Operator’s Manual
Display Mode • 51
2”. If you choose to resume the peak and TWA measurements during startup, the EAGLE
2 will include the time in operation when the unit was last turned off in the current time in
operation.
Date/Time Screen
The Date/Time Screen displays the current date and time.
Data Logging Screen
CAUTION:
Once you clear the data logger, you cannot retrieve any data previously
stored in the data logger.
The Data Logging screen displays the time remaining until the data logger memory is full
and asks if you want to clear the data logger memory.
To return to Measuring Mode while at the Data Logging Screen, press and release the
DISPLAY ADJUST NO button.
To clear the data logger memory, do the following:
1. With the Data Logging Screen displayed, press and release the
AIR
▲
YES button. The following screen appears asking you to confirm that you
want to clear the data logger memory.
2. If you do not want to clear the data logger memory at this point or at Step 3 below,
press and release the DISPLAY ADJUST NO button. The unit will return to
Measuring Mode.
9/26/2009
09:08:35
DATA LOGGING
200 HRS
REMAINING
ERASE LOG MEMORY?
LOG MEMORY
CLEAR DATA LOG?
www.
.com
1.800.561.8187
