RKC INSTRUMENT SR Mini HG, Дополнительная информация

Страница: 7 / 40

IMSRM07-E6
1
1. TRANSFER TO INITIAL SETTING MODE
This manual describes the Initialize setting changing procedure when this system is changed to
Extended communication (Initialize setting mode). Change the setting correctly in accordance with
precautions in each item.
If you add or delete a function module, or change the arrangement of the modules, or replace a
module with a different model, be sure to perform “Module initialization (identifier CL)” (P. 10)
before setting the data.
“Module initialization” stores the new module configuration in the

-PCP-A/B
module.
If data is set before “Module initialization” is performed, the

-PCP-A/B module will set the
previously stored initial data of the old modules in the new modules, which may cause
malfunction.
The Initial setting data should be set according to the application before setting
any parameter related to operation. Once the parameter in the Initial setting
data are set correctly, no further changes need to be made to parameter for the
same application under normal conditions. If they are changed unnecessarily, it
may result in malfunction or failure of the instrument. RKC will not bear any
responsibility for malfunction or failure as a result of improper changes in the
Initial setting.
WARNING
!
CAUTIONS