RKC INSTRUMENT SR Mini HG, Дополнительная информация

Страница: 25 / 40

2. COMMUNICATION IDENTIFIER LIST
IMSRM07-E6
19
Continued from the previous page.
Name
Iden-
tifier
Digits
Attri-
bute
Struc-
ture
Data range
Factory
set value
Event DI logic circuit
selection
[H-DI-B]

LU 1 R/W L 0: AND (1 active)
1: NAND (0 active)
2: OR (1 active)
3: NOR (0 active)
0
Event DI delay timer
setting
[H-DI-B]

LW
6 R/W L 0 to 255 times 1
Number of HBA trigger
points
[H-CT-A]

DH
6 R/W U 0 to 255 times 5
Positioning adjustment
counter
[H-TIO-K]

FV
6 R/W C 0 to 100 * 0
PCP module
DI type selection
[H-PCP-B]

VQ 6 R/W U 0: OFF (Unused)
1: Type 1
Memory area selection
(8 areas selection)
2: Type 2
Combination of control
RUN/STOP selection and
memory area selection
(4 areas selection)
3: Type 3
Combination of control
RUN/STOP selection, alarm
interlock release and
memory area selection
(2 areas selection)
For details, refer to

Digital
input (DI) of H-PCP-B
module (P. 22)
.
0
★
Identifier that is only supported in the SR Mini HG SYSTEM.
* Positioning adjustment counter
The opening adjustment and the motor time are taken in. When the specified setting counter value is
input, the operations begin. (This is only valid when control is stopped.)
Always adjust the opening first and capture the motor time after the adjustment is
complete.
For details, refer to the

Positioning adjustment counter (P. 29) .
For the motor time (Identifier: TJ), refer to the SR Mini HG SYSTEM Communication
Quick Manual (IMS01V02-E

) or SR Mini SYSTEM Communication Instruction
Manual (IMSRM04-E

) .
Continued on the next page.
Capture the
motor time
Setting to normal
status
FBR opening
adjustment
Motor time
(Identifier: TJ)