Riverbed SteelCentral NetExpress, Руководство по установке

Страница: 33 / 38

SteelCentral™ NetExpress Appliance Installation Guide 29
APPENDIX A
Specifications
This chapter describes:

“Console cable wiring” on page 29

“Controls and indicators” on page 30

“Mechanical and electrical specifications” on page 31
Console cable wiring
The console cable provided in the accessory kit has an RJ45 connector on one end and a 9-pin D-subminiature
connector on the other end. The connectors are wired as follows:
RJ45 Connector 9-pin D-subminiature
Connector
Signal Name Description
1 8
RTS
Request to send
2 6
DTR
Data terminal ready
3 2
SOUT (TxD)
Serial output (Transmit data)
4 5
GND
Ground
5 5
RI
Ring indicator
6 3
SIN (RxD)
Serial input (Receive data)
7 4
DCD or DSR
Data carrier detect or Data set ready
8 7
CTS
Clear to send
D-subminiature
RJ45