Riverbed SteelCentral NetExpress, Руководство по установке

Страница: 21 / 38

SteelCentral™ NetExpress Appliance Installation Guide 17
CHAPTER 5
Installing new software
This chapter describes how to download the software from the Riverbed Support site and install it in NetExpress. It
provides a checklist section that can be used as a guide for those familiar with installing software from a USB memory
stick, and more detailed step-by-step instructions explaining items on the checklist.

“Overview” on page 17

“Checklist” on page 18

“Step 1 - Download the software” on page 19

“Step 2 - Create bootable USB memory sticks” on page 19

“Step 3 - Insert the bootable USB memory stick into the system” on page 19

“Step 4 - Connect to the console port” on page 19

“Step 5 - Configure the BIOS” on page 19

“Step 6 - Install the software” on page 20

“Step 7 - Remove the USB memory stick” on page 20

“Step 8 - Run the configuration wizard” on page 20

“Step 9 - Log into the web user interface” on page 21
Overview
NetExpress is shipped from the factory with its software already installed. You can configure the factory-installed
software and begin using the product, or you can perform a complete installation of software downloaded from the
Riverbed Support site.
To configure and run the factory-installed software, refer to Chapter 4, “Configuration.” To download a new copy of
the software from the Riverbed Support site, follow the instructions in this chapter.