20
SteelCentral™ NetExpress Appliance Installation Guide
Installing new software
Step 6 - Install the software
3.
On the Advanced menu:
Select “USB Configuration” and press Enter.
Select “Make USB Devices Non-bootable” and press Enter.
Select “Disabled” and press Enter.
Press Esc to go back to the previous menu.
4.
From the EXIT menu, select “Save Changes and Exit” and press Enter.
5.
Select “OK” in the resulting screen to save the changes and exit the BIOS configuration tool.
Step 6 - Install the software
When the system finishes booting from your USB memory stick, enter “install” at the prompt.
Software installation requires approximately 20 minutes. After the installation process completes, the USB memory
stick can be removed. If it is not removed, the system boots from the USB and presents the “boot” prompt again.
Step 7 - Remove the USB memory stick
When the software installation has completed and the “boot” prompt is displayed, remove the USB memory stick and
power-cycle the appliance. After the system reboots, the login prompt is displayed.
Step 8 - Run the configuration wizard
1.
On the system that has the cable connected to the NetExpress console connector, use your terminal emulator to log
in through the console port. The default login credentials are:
User name:
admin
Password:
admin
2.
When the configuration wizard starts, it displays the product model and serial number. If you will be activating the
licenses manually, record this information to use during license activation.
3.
Enter the required information at the prompts. Use your keyboard’s Up Arrow to choose an IPv4 address or an
IPv6 network to pre-populate the Management address field. For IPv6, add the host address before the prefix
length. A typical configuration dialog proceeds as follows:
Welcome to SteelCentral Setup!
Configuring SCNE-00470 with serial number 0000000000000
Press up arrow to access these addresses or ctrl+c to restart
Discovered IPv4 address 10.38.136.55/18
Discovered IPv6 network 2600:809:200:1a02:/64
Содержание SteelCentral NetExpress
