Riverbed SteelCentral NetExpress, Руководство по установке

Страница: 18 / 38

14 SteelCentral™ NetExpress Appliance Installation Guide
Configuration Step 2 - Log in to the web user interface
2. When the configuration wizard starts, it displays the product model and serial number. If you will be activating the
licenses manually, record this information to use during license activation.
3. Enter the required information at the prompts. Use your keyboard’s Up Arrow to choose an IPv4 address or an
IPv6 network to pre-populate the Management address field. For IPv6, add the host address before the prefix
length. A typical configuration dialog proceeds as follows:
Welcome to SteelCentral Setup!
Configuring SCNE-00470 with serial number 0000000000000
Press up arrow to access these addresses or ctrl+c to restart
Discovered IPv4 address 10.38.136.55/18
Discovered IPv6 network 2600:809:200:1a02:/64
Please enter the MGMT IP ADDRESS
ip/prefixlen: 2600:809:200:1a02:100:0:a26:8837/64
Please enter the GATEWAY IP ADDRESS
ip: 2600:809:200:1a02::1
Please enter the password for the mazu, dhcp, root, and admin shell users: ********
Please re-enter the password: ********
New Settings:
Product: SCNE-00470
IP Address: 2600:809:200:1a02:100:0:a26:8837/64
Gateway: 2600:809:200:1a02::1
NOTE: Setup will conclude with a reboot of this SteelCentral device. After all modules have
rebooted, setup can be completed by logging into the UI at
https://[2600:809:200:1a02:100:0:a26:8837]/
Login as admin/admin.
NOTICE: All existing settings and logs will be lost.
Finish Setup and Reboot? (yes/no): yes
Working.........
4. When the wizard completes and exits, the system reboots. Wait until the system finishes rebooting before
continuing with the next step.
Step 2 - Log in to the web user interface
1. Using a system that is connected to the management network, point your web browser to the IP address you
specified in the configuration wizard in the previous step.
https://< NetExpress_IP_address >
2. Log in to the NetExpress user interface. The default credentials are:

User name: admin

Password: admin
The first time you log in to the NetExpress user interface, it displays the Setup page.
3. On the Setup page, ensure that all the required fields (marked with an asterisk) are filled in.