Rittal 7338.321, Монтаж, установка и эксплуатация

Страница: 14 / 86

NOTICE
Property damage from cooling ambient air!
The discharged extinguishing agent extracts heat from the ambient air contained in
the extinguishing zone. This cools down the extinguishing zone by as much as
20 °C (36 °F) when fighting a fire.
● Do not mount components that are sensitive to cold and varying temperatures
in the immediate vicinity of the discharge nozzle.
NOTICE
Property damage from falling and flying objects!
The discharge velocity of the extinguishing agent may cause unsecured objects to
tip over or become airborne.
● Do not place any loose objects into the outflow area of the discharge nozzle.
2.7 Behavior in the event of a fire
2.7.1 Preventive steps
● Always be prepared for fires and accidents!
● Keep first-aid equipment (first-aid kit, blankets, etc.) and substitute extinguishing
agents (e.g. fire extinguisher) in proper working order and readily available.
● Familiarize personnel with accident prevention, first aid and rescue equipment as
well as options for releasing the system manually.
● Keep access paths clear for rescue vehicles.
2.7.2 Steps in the event of a fire
L
WARNING
Risk of death due to fire!
Severe fire smoke may develop when a fire erupts and while the fire is being extin-
guished. Fire smoke development may result in severe airway damage or death.
● Keep the extinguishing zone closed in the event of a fire, e.g. do not open any
of the switch or server cabinet doors.
● After a fire, do not have the extinguishing zone opened by the safety officer
until the danger of re-ignition has subsided.
● Shut down all consumers of the power supply that are in the cabinet.
Take the following steps when a fire erupts:
● Initiate first-aid measures if necessary.
● Alert any endangered persons in the adjoining areas.
Safety
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US 14