Rittal 3311.138, Руководство по сборке и эксплуатации

Страница: 55 / 94

Rittal Liquid Cooling Package 55
9 Operation
EN
The following changes occur in case of an incorrect
entry in the dialogue (illustrated here by the example
of an incorrectly entered IP address):
– A red "prohibited symbol" (fig. 69, item 3) appears
after the incorrect entry (fig. 69, item 2) in the Net-
mask field (fig. 69, item 1)
– By holding the mouse pointer over the prohibited
symbol, additional information about the error will
appear (fig. 69, item 4).
– The Save button is deactivated (fig. 69, item 5), so
that the current values cannot be saved.
Proceed as follows to rectify the error:
„
Using the information provided, identify the precise
nature of the incorrect entry.
In this particular example, the value entered does
not comply with the format of an IP address.
„
Correct the defective value, e.g. by entering the val-
ue "255.255.255.0".
The "prohibited symbol" is masked out and the
Save
button is activated.
„
Save the settings by pressing the Save button.
9.4.6 Changing parameter values
Different parameters for the currently selected com-
ponent are displayed in the list view of the
Observa-
tion index tab. Some of these parameters can be ad-
justed by the operator, while others have fixed values
assigned to them.
For all parameters that can be changed, an "Edit" sym-
bol in the form of a stylised notepad and pen will ap-
pear after the respective parameter if the mouse
pointer is placed in the relevant line (fig. 70, item 1).
Fig. 70: Editable parameter with "Edit" symbol
Key
1 "Edit" symbol
If this symbol does not appear, the corresponding val-
ue cannot be altered.
Example:
„
In the tree diagram, select the entry
"Liquid Cooling Package".
„
In the right-hand part of the screen, select the Ob-
servation index tab.
„
One after the other, open the "Liquid Cooling
Package" and "Device" entries by clicking on the
"plus" symbol in front of the entry (fig. 71, item 1).
Fig. 71: Selecting an individual parameter
Key
1 Liquid Cooling Package and Device entries
2 "Location" parameter
„
Position the mouse pointer at the end of the first col-
umn in the "Location" line (fig. 71, item 2).
An "Edit" symbol will appear, and the mouse pointer
will change to a "Hand" symbol.
„
Click on the "Edit" symbol.
A "Write Values" dialogue will appear with the pa-
rameter "Device.Location".
Fig. 72: "Write Values" dialog
„
Here, enter the location of the Liquid Cooling
Package.
„
Confirm your entry by clicking on the
Write
button.
The dialogue box will close and the new value will
appear in the "Location" line.
„
Next, position the mouse pointer at the end of the
first column in the "Type" line.
In this case, no "Edit" symbol will appear, i.e. the val-
ue stored here (e.g. "LCP-I 30 kW") cannot be al-
tered.
You may wish to amend several values simultaneous-
ly, or may not know the entry under which the required
parameter is stored. In such cases, all editable pa-
rameter values of subordinate entries can also be dis-
played in one window.
„
Simply open the "Liquid Cooling Package" entry by
clicking on the "plus" symbol in front of that entry
(fig. 73, item 1).
„
Position the mouse pointer at the end of the first col-
umn in the "Location" line (fig. 73, item 2).
An "Edit" symbol will appear, and the mouse pointer
will change to a "Hand" symbol.