6
GB
LED Eco Flood
Operation and maintenance manual
Dear valued customer,
Thank you for purchasing our floodlight.
Before operating the floodlight, please read the following instructions for use carefully and keep
them in a safe place for future reference.
Proper Use
The floodlight is spray-protected, IP44 and for use outdoors. For connection to concealed lines.
The floodlight conforms with the appropriate European CE regulations
General Safety Instructions
• never look directly into the LED light source. The light emitted can contain the colour blue.
• must always be placed at least 1m away from the surface being illuminated – in particular, the
power cable must not be illuminated or come into contact with the metal housing – maintain the
specified minimum clearances.
• always allow the device to cool down sufficiently – the casing may get extremely hot. To clean the
spotlight, disconnect it from the mains and secure the circuit against unintentional restart.
• must only be used on flat, stable surfaces.
• use only with a sufficiently protected 230V~ installation.
• must not be used in rooms that represent an explosion hazard (e.g. cabinetmaker‘s workshop,
painting operation, or similar).
• must not be used in the immediate vicinity of flammable materials.
• must not be set up in the immediate vicinity of pools, fountains, ponds, or similar bodies of water.
• must not be immersed in water or other liquids.
• must not be operated with wet hands; never look directly into the light source.
• must never be covered.
• must never be operated with an open housing, missing or damaged wiring compartment, or
missing or damaged lens.
• must never be sprayed or cleaned using a steam pressure cleaner since this can damage the
insulation and seals.
• must never be repaired by the user. Repairs must only be carried out by the manufacturer or an
authorized service representative.
Technical Data
• Type P1H10B2-1; 10W LED
• Type P2H20B2; 20W LED
• Type P3H30B2; 30W LED
• Voltage: 230V~, 50Hz
• Protection class: IP44
• Protection class: 2
• Acquisition angle: 120°
• Response time: 10 sec.– 12 min
ANL_P1H10B2-1_P2H20B2_P3H30B2.indd 6
21.09.2016 09:21:40