RITE-HITE Wheel-Lok GWL-2300, Руководство пользователя

Страница: 10 / 52

Global Wheel-Lok™ GWL-2300
Owner’s Manual
Rite-Hite
®
10 Publication: 00007-AM-EN 2016-08-08
OPERATING PROCEDURES
Stored Position / Restraint UNLOCKED
If the GWL-2300 vehicle restraint is in the UNLOCKED
position (shaft assembly is down and stored in barrier
ramp), the Light Communication System should give the
following signals:
1.
OUTSIDE light flashing GREEN, which indicates that
a vehicle may pull into or out of the loading bay.
2.
INSIDE light flashing RED, which indicates that
loading or unloading is not permitted, since the truck
is not secured against the building. See Figure 5.
Restraint Locking, LOCK Button Pressed
It is assumed that the loading bay is empty (no truck).
The outside GREEN light and the inside RED light are
flashing, the barrier is down. A truck can now approach
the loading position. As the truck backs in, it will activate
the trigger, causing the locking arm to come up. The
mechanism will automatically adjust to the correct wheel
size. The truck will move locking arm and trolleys into
position automatically. When the truck is parked firmly
against the bumpers, the operator can lock the vehicle.
To lock the vehicle, the LOCK button must be depressed
momentarily. The outside light will change instantly from
GREEN to RED. The inside light will remain steady RED
until the locking mechanism is engaged properly. Once it
is engaged, the inside light will change to GREEN. The
truck may now be serviced. The light communication and
truck position are shown in Figure 6.
OUTSIDE LIGHT
STATUS
CONTROL BOX
STATUS
GWL-2300 POSITION
Outside Lights
Inside Lights
RED
GREEN
OUTSIDE LIGHTS
Check outside lights when
both LEDs are off.
UNLOCK
LOCK
1
3
2
HORN OVERRIDE
DOK-LOK ®
DO NOT ENTER TRAILER
ENTER TRAILER
Visually inspect before loading/
unloading vehicle. DOK-LOK
hook must secure rear impact
guard. See warnings on side
panel.
Additional warning labels,
manuals and other information
are available by calling:
1-800-456-0600
If red light is on and/or horn
sounds, DOK-LOK is not
properly engaged.
Check operation of DOK-LOK.
Vehicle may not be against dock.
R.I.G. may not be compatible.
Hook travel may be obstructed.
Before using "HORN OVERRIDE,"
secure vehicle by other means.
Reset system by engaging " HORN
OVERRIDE" control again. Then repeat
"UNLOCK" operation.
When in "HORN OVERRIDE" mode:
Both red and green Lights flash. "LOCK" and
"UNLOCK" controls are not functional.
Horn can be silenced by engaging
"HORN OVERRIDE" control.
Before using "HORN OVERRIDE," secure
vehicle by other means prior to entering.
If horn and red light are on
after "UNLOCK" control is
pressed, hook may be held
by R.I.G.
To release hook:
Back trailer up against dock.
Repeat "UNLOCK" operation.
FIGURE 5
- STORED POSITION, INSIDE RED LIGHT AND OUTSIDE GREEN LIGHT
GWL-2300
Control Box Status
Outside Light
Status
Inside Lights
Outside Lights