RITE-HITE Wheel-Lok GWL-2300, Руководство пользователя

Страница: 12 / 52

Global Wheel-Lok™ GWL-2300
Owner’s Manual
Rite-Hite
®
12 Publication: 00007-AM-EN 2016-08-08
OPERATING PROCEDURES
FAULT State from LOCKING State
In case the locking mechanism can not engage properly,
the alarm will sound. The outside and inside lights will
show flashing RED. The light communication, alarm and
truck position are shown in Figure 7.
HORN OVERRIDE State, HORN OVERRIDE
Code Entered or HORN OVERRIDE Button
Pressed after Securing Trailer by
Alternate Means
!
DANGER
Before operating “HORN OVERRIDE”, secure
trailer by other means.
The horn may be silenced AFTER the trailer has been
secured by other means. This can be done by entering the
horn silence code. Both inside lights will now flash (red
and green) and all control buttons are inactive. See Figure
8. Once service is completed, enter the horn silence code
and press the unlock push button. The truck/trailer may
now depart once GWL-2300 unlocks.
OUTSIDE LIGHT
STATUS
CONTROL BOX
STATUS
GWL-2300 POSITION
GREEN
RED
Outside Lights
Horn
Inside Lights
OUTSIDE LIGHTS
Check outside lights when
both LEDs are off.
UNLOCK
LOCK
1
3
2
HORN OVERRIDE
DOK-LOK ®
DO NOT ENTER TRAILER
ENTER TRAILER
Visually inspect before loading/
unloading vehicle. DOK-LOK
hook must secure rear impact
guard. See warnings on side
panel.
Additional warning labels,
manuals and other information
are available by calling:
1-800-456-0600
If red light is on and/or horn
sounds, DOK-LOK is not
properly engaged.
Check operation of DOK-LOK.
Vehicle may not be against dock.
R.I.G. may not be compatible.
Hook travel may be obstructed.
Before using "HORN OVERRIDE,"
secure vehicle by other means.
Reset system by engaging " HORN
OVERRIDE" control again. Then repeat
"UNLOCK" operation.
When in "HORN OVERRIDE" mode:
Both red and green Lights flash. "LOCK" and
"UNLOCK" controls are not functional.
Horn can be silenced by engaging
"HORN OVERRIDE" control.
Before using "HORN OVERRIDE," secure
vehicle by other means prior to entering.
If horn and red light are on
after "UNLOCK" control is
pressed, hook may be held
by R.I.G.
To release hook:
Back trailer up against dock.
Repeat "UNLOCK" operation.
FIGURE 7 - FAULT MODE, TRUCK NOT PROPERLY LOCKED, HORN ON
GWL-2300
Control Box Status
Outside Light
Status
Inside Lights
Outside
Lights
Horn
OUTSIDE LIGHT
STATUS
CONTROL BOX
STATUS
GWL-2300 POSITION
GREEN
RED
Outside Lights
Inside Lights
OUTSIDE LIGHTS
Check outside lights when
both LEDs are off.
UNLOCK
LOCK
1
3
2
HORN OVERRIDE
DOK-LOK ®
DO NOT ENTER TRAILER
ENTER TRAILER
Visually inspect before loading/
unloading vehicle. DOK-LOK
hook must secure rear impact
guard. See warnings on side
panel.
Additional warning labels,
manuals and other information
are available by calling:
1-800-456-0600
If red light is on and/or horn
sounds, DOK-LOK is not
properly engaged.
Check operation of DOK-LOK.
Vehicle may not be against dock.
R.I.G. may not be compatible.
Hook travel may be obstructed.
Before using "HORN OVERRIDE,"
secure vehicle by other means.
Reset system by engaging " HORN
OVERRIDE" control again. Then repeat
"UNLOCK" operation.
When in "HORN OVERRIDE" mode:
Both red and green Lights flash. "LOCK" and
"UNLOCK" controls are not functional.
Horn can be silenced by engaging
"HORN OVERRIDE" control.
Before using "HORN OVERRIDE," secure
vehicle by other means prior to entering.
If horn and red light are on
after "UNLOCK" control is
pressed, hook may be held
by R.I.G.
To release hook:
Back trailer up against dock.
Repeat "UNLOCK" operation.
FIGURE 8 - FAULT MODE, TRUCK NOT PROPERLY LOCKED, HORN SILENCED
Inside Lights
Outside
Lights
Control Box Status
Outside Light
Status
GWL-2300