RITE-HITE Wheel-Lok GWL-2300 страница 16 Скачать руководство пользователя

Страница: 16 / 52

Global Wheel-Lok™ GWL-2300

Owner’s Manual

Rite-Hite

Publication:

00007-AM-EN 2016-08-08

MAINTENANCE

180 Days

1.  Do all the Daily and 90 Day maintenance.
2.  Tighten the anchor bolts to 100 ft-lbs.
3.  Check barrier roller tube for damage.
4.  Check if all the bolts on the UHMW strip are tight.
5.

Manually push the locking arm weldment along the

length of the frame to verify smooth operation. If

sticky, check for proper lubrication.

360 Days

1. Do all Daily, 90 and 180 Day maintenance.
2. Operate unit in (5) different places to ensure the

locking mechanism engages properly.

Disassemble both the locking arm and trigger trollies

and inspect internal sliders for wear. Replace as

necessary. See Figure 13.

4. Inspect wear pads in locking arm assembly. See

Figure 13.

NOTICE

Dock equipment must be protected by 4in [100mm]

thick bumpers.

WORN, TORN, LOOSE, OR MISSING

BUMPERS MUST BE REPLACED

5. Inspect pawl mechanism for wear on sliders.
6. Inspect bronze tooth on locking pawl.
7.

Verify decals are present and legible, replace as

required.

Inspect lifting rail bushings for wear and replace if

worn through to pin hole.

Frame

Wear Strips

Steel

Trolley Sliders

Wear Pads

Pawl

UHMW Blocks

And Slider

Bronze Tooth

Lifting Rail Bushing
5 ea. on Rail

Steel

Trolley Slider

Torque to 73 Ft-Lbs. (Typ.)
Both Trolley’s

NOTE: Use loctite on screw.
DO NOT over torque. Torque
To 60 In-Lbs.

FIGURE 13 - INSPECTION

Note: Use Loctite on

screw. DO NOT over

torque. Torgue to 60

In-Lbs.

Wear Pads

Frame Wear
Strips

Bronze Tooth

Lifting Rail Bushing
5 places on Rail

Steel Trolley Sliders

Pawl UHMW
Blocks and Slider

Steel Trolley
Slider

Torque to 73 Ft-Lbs. (Typ.)
Both Trolley's)

Содержание Wheel-Lok GWL-2300





















































Результаты поиска

Содержание Wheel-Lok GWL-2300

Отзывы:

Похожие инструкции для Wheel-Lok GWL-2300

Бренды по названию

Популярные бренды

RITE-HITE Wheel-Lok GWL-2300, Руководство пользователя

Результаты поиска

Содержание Wheel-Lok GWL-2300

Отзывы:

Похожие инструкции для Wheel-Lok GWL-2300

Бренды по названию

Популярные бренды