Pub. No. 1243 — April 2008
13
RITE-HITE
®
STR-4100 DOK-LOK
®
Installation Manual
SPECIAL APPLICATION INSTALLATION ITEMS
Pit Steel
Front Frame Angle
Shim As Required
Behind Track Angles.
1/2” THK Min. Bar
Stock For Distances
Greater Than 1” Use
Channel
Extend Lip Guide
Remove Excess
Material From
Shaded Area
As Shown.
Lip Guide
Pit Steel
Front Frame Angle
Shim (See Back View Figure 13)
Thickness As Required Full
Length Of Track Plate (3-4 Shims
3” wide x “A” x “B”)
1/2” Maximum, If Greater Longer
Anchors Are Required, If 1” or
Greater DOK-LOK Bracket
Required.
“A” Dim
Length From Top Of Pit Steel To
Bottom Of Track Plate
“B” Dim
Thickness Of Shim
“C” Dim
If Dimension “C” Is Greater Than
3” inches Consult Factory.
Shim
“A”
“B”
“C”
Back View For
Anchor Installation
Back View For
Embedded Plate
Installation
Typ. Between Holes
And Along Sides
1/4”
1-6
2-1/8”
3/4” Typ.
Weld to
Embedded
Plate Prior To
Plug Welding
1/4”
1-6
Typ. After
Welding
Shims To
Imbedded
Plate
3”
1/4” Typ.
8 - 3/16”
FIGURE 12 - RECESSED LEVELER
FIGURE 13 - PROTRUDING LEVELER
FIGURE 14 - BACK VIEW
7/8” Typ.
1-1/2”
