IRQ n Assigned to
When resources are controlled manually, assign each
system interrupt as one of the following types,
depending on the type of device using the interrupt:
Legacy ISA Devices compliant with the original PC AT
bus specification, requiring a specific interrupt (such as
IRQ4 for serial port 1).
PCI/ISA PnP Devices compliant with the Plug and Play
standard, whether designed for PCI or ISA bus
architecture.
The choice: Legacy ISA, PCI/ISA PnP.
DMA n Assigned to
When resources are controlled manually, assign each
system DMA channel as one of the following types,
depending on the type of device using the interrupt:
Legacy ISA Devices compliant with the original PC AT
bus specification, requiring a specific DMA channel
PCI/ISA PnP Devices compliant with the Plug and Play
standard, whether designed for PCI or ISA bus
architecture.
The choice: Legacy ISA, PCI/ISA PnP.
PCI IRQ Activated
This sets the method by which the PCI bus recognizes that
by
an IRQ service is being requested by a device. Under all
circumstances, you should retain the default configuration
unless advised otherwise by your system's manufacturer.
The choice: Level, Edge.
_______________________________________________________________
3-19
【
【
【
【
3
】
】
】
】
__________________________________
PCI IDE IRQ Map to
This allows you to configure your system to the type of
IDE disk controller in use. By default, Setup assumes
that your controller is an ISA (Industry Standard
Architecture)device rather than a PCI controller. The
more apparent difference is the type of slot being used.
If you have equipped your system with a PCI controller,
changing this allows you to specify which slot has the
