![background image](http://html1.mh-extra.com/html/rise/r-626/r-626_user-manual_1464296041.webp)
3.8 Supervisor/User Password
These two options allows you to set your system passwords. Normally,
supervisor has a higher right to change the CMOS setup option than the
user. The way to set up the passwords for both Supervisor and User are
as follow:
1. Choose "Change Password" in the Main Menu and press <Enter>. The
following message appears:
"Enter Password:"
2. The first time you run this option, enter your password up to only 8 characters
and press <Enter>. The screen does not display the entered characters.
3. After you enter your password, the following message appears prompting you
to confirm the new passward:
"Confirm Password"
4. Enter exact the same password you just typed again to confirm the passwod
and press <Enter>.
5. Move the cursor to Save & Exit Setup to save the password.
__________________________________________________________________
3-25
【
【
【
【
3
】
】
】
】
__________________________________
6. If you need to delete the password you entered before, choose the Super-
visor Password and press <Enter>. It will delete the password that you had
before.
7. Move the cursor to Save & Exit Setup to save the option you did, otherwise
the old password will still be there when you turn on your machine next time.
8. Press <ESC> to exit to the Main Menu.
Note: If you forget or lose the password, the only way to access the system is
to clear the CMOS RAM by setting JBAT1. All setup information will be
lost and you need to run the BIOS setup program again.