The choice: Suspend, Power Off, Disabled.
PM Timers
The following four modes are Green PC power saving functions which are only use
configurable when User Defined Power Management has been selected. See abov
for available selections.
HDD Off After
By default, this item is Disabled, meaning that no matter
the mode the rest of the system, the hard drive will remain
ready. Otherwise, you have a range of choices from 1 to
15 minutes. This means that you can elect to have your
hard disk drive be turned off after a selected number of
minutes or when the rest of the system goes into a
Suspend mode.
Doze Mode
When enabled and after the set time of system inactivity,
the CPU clock will run at slower speed while all other
devices still operate at full speed.
Standby Mode
When enabled and after the set time of system inactivity,
the fixed disk drive and the video would be shut off while
all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity,
all devices except the CPU will be shut off.
PM Events
You may disable activity monitoring of some common I/O events and interrupt
requests so they do not wake up the system. The default wake-up event is keyboa
activity.
_______________________________________________________________
3-15
【
【
【
【
3
】
】
】
】
__________________________________
HDD Ports Activity
When set to On (default), any event occurring at a HDD
(serial) port will awaken a system which has been
powered down.
