User Functions and Settings
Page 38
Scheduling Weekly Programs
The LightSYS2 enables you to automate some system operations. Each program can be
defined with up to two time intervals per day, during which the system automatically
performs one of the following functions
:
Automatic Setting/Unsetting:
This program automatically sets and unsets the
system during your required time intervals.
Automatic PO Activation:
A PO (home appliance) activation program
automatically activates and deactivates POs during your required intervals.
User Limitation
: A user limitation program automatically prevents certain users
from unsetting the system during specified time intervals.
Up to four scheduling programs can be defined. Use the table in
Appendix C – Scheduling
Tables
to define your date.
Automatic Setting/Unsetting
1.
Press
and enter your code followed by
.
2.
Using the arrow keys, scroll to the option
Clock
and press
.
3.
Using the arrow keys, scroll to the
Scheduler
option and press
.
4.
Using the arrow keys, scroll to the
Weekly
option and press
.
5.
Select the Schedule program index number.
6.
Select
Set / Unset
and press
.
7.
Follow the LCD display messages that will guide you through the programming
procedure. When defining Set/Unset program, you need to define the following
parameters: Partition, Time Schedule, Setting mode, and Label
Notes:
When defining the Day/Time intervals for each day of the week you can
select
8 All
to set the same time intervals for every day in the week.
Use
key to enter
Y
when requested. For example when defining a
partition that will be automatically set and unset
Leave the time at
00:00
if you do not want to perform the automation
during the current interval for the current day
