Rip curl 17119, Инструкция пользователя

Страница: 26 / 76

26
countdown the timer automatically starts to count up from zero. This new
function is to advise you how much time has elapsed since the alarm went
off.
CH Chronograph (Stop watch) with lap memory:
A chronograph/stop watch (count-up timer) will count in 100th of a second
from 0 to 99 hours, 59 minutes, 59 seconds.
Simply push the START/STOP to commence and stop the chronograph. Then
push and hold the LAP/RESET button for 3 seconds to reset to 00:00:00.
FT Future Tide: Based upon correctly programmed local High Tide infor-
mation, the OCEANTIDE watch will provide a graphic display of the Tide
conditions and Moon Phase for any day and time till 2099. So you can see
what the Tide and Moon are doing to help plan your surf trips and holidays.
NOTE: It is also in this mode that you program your local High Tide informa-
tion. See the setting of local High Tide section.
DT Dual Time: This function is very useful should you travel away from home
to another time zone. We recommend you program the DT setting to your
home time and date, and program your NT setting to the new time zone
actual time and date. (You must do this if you want your daily alarm to work
correctly for the time zone you are in.)
FT2 Future Tide TWO: Again, based upon correctly programmed local High
Tide information, the OCEANTIDE watch will provide a SECOND graphic dis-
play of the Tide conditions and Moon Phase for any day and time SET IN
DUAL TIME (till 2099). So you can see what the Tide and Moon are doing to
help plan your surf trips and holidays.
NOTE: It is also in this mode that you
program your local High Tide information for the DT area. See the setting of
DT area High Tide section.
LIGHT FUNCTION: In any MODE you can simply push the LIGHT button and the
whole screen will light up and stay on for 3 seconds.