Rip curl 17119, Инструкция пользователя

Страница: 30 / 76

30
FT SETTING FUTURE TIDE :
• From NT mode push the MODE button four times.
• FT is displayed in the fifth box from the left, Month, Date, Hour and Year
are displayed.
• Advanced the Year with LAP/RESET till correct. (For quick advance hold in
the LAP/RESET button)
• Push START/STOP the Month will flash, advance the Month with LAP/RESET till correct.
• Push START/STOP the Date will flash, advance the Date with LAP/RESET till correct.
• Push START/STOP the Hour will flash, advance the Hour with LAP/RESET to see the Tide
conditions for selected Month, Date by Hour.
When finished just push the MODE button three times to return to NT mode.
DT SETTING DUAL TIME :
• From NT mode push the MODE button five times.
• DT is displayed in the sixth box from the left: Month, Date, Hour and
Seconds are displayed.
• Hold down MODE for 3 seconds till “SET” appears in the top right corner.
The Year will appear and be flashing.
• Advance the Year with LAP/RESET till correct. (For quick advance hold in the LAP/RESET
button)
• Push START/STOP the Month will flash, advance Month with LAP/RESET till correct.
• Push START/STOP the Date will flash, advance the Date with LAP/RESET till correct.
• Push START/STOP the Hour will flash, advance the Hour with LAP/RESET till correct in AM
or PM.
• Push START/STOP the Minutes will flash, advance the Minutes with LAP/RESET till correct.
When all new settings are done, you must push the MODE button to save.
SETTING DUAL TIME HIGH TIDE :
Note 1 : Setting DUAL TIME (DT) HIGH TIDE information is done inside the FT2 mode. You must only
use HIGH TIDE information from your DT area. The HIGH TIDE information can be from today or any
other day, as long as the correct Year, Month, Date and Time is programmed for that HIGH TIDE. You
can use any DT tide tables from a surf shop or DT daily newspaper to find HIGH TIDE times. (Remem-
ber you must complete each section of the programming within 30 seconds or the watch will return
to FT MODE and you will need to start again. So get your DT HIGH TIDE information prior to starting.)
Note 2 : During Daylight Saving you must always set DT mode and DT HIGH TIDE information to
Standard Time, (not in Daylight Saving Time), and DO NOT add one hour to your DT Tide chart time.
When setting is complete, push and hold for 5 seconds the START/STOP button in DT mode to
advance for DST. At the end of DST push and hold the START/STOP button for 5 seconds again to
return to Standard Time.