Rip curl 17119, Инструкция пользователя

Страница: 9 / 76

-Firstly, use the tide set procedure above to preset the beach closest to your beach.
-Then find the average time offset between the selected preset beach and your beach.
Eg. Bells plus 45 minutes equals my local beach.
-To activate CUSTOM setting, in TIDE mode press and HOLD LAP/RESET in for 2 seconds,
MINS appears and a ZERO digit will flash.
-Use START/STOP & LAP/RESET to increase or decrease the time offset till correct.
-Press MODE/SET to lock in your offset. CUSTOM will appear in the screen. You can then
rename the customized beach to the new beach name.
-Use START/STOP & LAP/RESET to scroll through the alphabet and change the selected
letter.
-Press MODE/SET to move to the next letter.
-Once complete, HOLD MODE/SET in for 2 seconds to save all information
NOTE: If just want to leave the customized beach named as CUSTOM, you can just HOLD
MODE/SET in for 2 seconds to save.
ALSO NOTE: Once you have customized a preset beach, eg. Bells, that location has been
over written and will no longer appear in the watches’ beach list. To return to the original
beach name and tide data, you must be in TIDE MODE, HOLD LAP/RESET in for 2
seconds, the MIN digits will flash, use START/STOP & LAP/RESET to change the offset
back to zero, HOLD MODE/SET in for 2 seconds to return to the original beach used to
create the offset.
SPOT X BEACH INTRODUCTION
Just in case you can’t find a preset location that can be customized to your local
beach. Your watch is equipped with a Spot X averaging tide function. Spot X follows
the world accepted average tide cycle of 6hrs 12mins and 25 seconds from High
tide to Low tide. Spot X is present at the bottom of EVERY beach list.
SPOT X SETTING
-Select Spot X from any beach list. (See tide setting)
-Find the next HIGH tide time for the beach you want to create and set the information
using the procedure below.(Tide time information can be found in the local newspaper).
-In TIDE mode HOLD LAP/RESET in for 2 seconds, the year will appear and flash, use
START/STOP & LAP/RESET to select the year.
-Press MODE/SET, the MONTH will flash, use START/STOP & LAP/RESET to enter month
of the next high tide.
-Press MODE/SET the DATE will flash, use START/STOP & LAP/RESET to enter date of
the next high tide.
-Press MODE/SET, the HOUR will flash, use START/STOP & LAP/RESET to enter hour of
the next high tide.
-Press MODE/SET, the MINUTES will flash, use START/STOP & LAP/RESET to enter
minutes of the next high tide.
9