Rip curl 17119, Инструкция пользователя

Страница: 7 / 76

7
DIGITAL TIME AND DATE SETTING
NOTE: There are 3 possible digital views in TIDE/DATE/TIME MODE (main screen).
Use START/STOP or LAP/RESET to switch between views.
1. The date: Can be displayed as DD-MM (Day/Month) or MM-DD (Month/Day)
To set the date and time.
Ensure you are in TIDE/DATE/TIME MODE (main screen).
- HOLD MODE/SET in for 2 seconds to enter setting.
- Press MODE/SET to advance through Year, Month, Day/date, Hour, Minute,
Seconds, Date format, 12 or 24 hr format, Hourly chime, Key tone and Feet or
Meters.
- Press START/STOP to increase. Press LAP/RESET to decrease.
Once complete, you must HOLD MODE/SET in for 2 seconds again to exit setting
mode and save any adjustments.
DAYLIGHT SAVINGS TIME (DST) SETTING
- Ensure you have the TIME showing in the digital screen.
- HOLD START/STOP in for 5 seconds and your watch will automatically adjust
to Daylight Savings Time. A plus (+) icon will appear in left of the screen. This
icon indicates the DST function is active.
To adjust the time at the end of the DST season simply repeat the procedure
above.
NOTE: At the start and end of DST season you MUST use the DST function as it
corrects the current time, and TIDE time to be DST correct.
DUAL TIME SETTING
We recommend you always use the analogue time as your home time when you
travel or as a second time zone when you are at home.
Remember, the DIGITAL time MUST always be set to the local time wherever
you are so that the tide time and alarm function are correct.
2. Digital time: Wherever you are, for accurate tide time and alarm usage, the
digital time must be set to the local time and date.
3. The tide time: The display below shows the tide will be low at 3.40pm.