Rion VM-55 Скачать руководство пользователя страница 99

Страница: 99 / 204

Store Operation

Auto mode operation

Memory store

Note

The optional Extended Function Program VX-55EX
should be installed.

An SD memory card should be inserted.

With the Auto mode,

store and

store are executed

simultaneously (separate operation also possible).

The procedure for storing data using Auto mode is as follows.

Confi rm the SD memory card has been inserted in the card slot.

1. Press the POWER key to turn the unit on.

2. Press the MENU/ENTER key to bring up the menu list screen.

3. Use the

keys to select [Store] and press the MENU/

ENTER key. The store screen appears.

4. Use the

keys to select [Store Mode] and press the MENU/

ENTER key. The store mode settings screen appears.

5. Use

the

keys to select [Auto] and press the MENU/ENTER key.

Store screen when Auto mode is selected

Содержание VM-55













































































































































































































Результаты поиска

Содержание VM-55

Отзывы:

Rion VM-55, Инструкция по эксплуатации, Страница: 99 / 204

Результаты поиска

Содержание VM-55

Отзывы: