Rion VM-55 Скачать руководство пользователя страница 131

Страница: 131 / 204

119

Optional Accessories

EC-02S – EC-54S conversion cord EC-54ST

EC-54ST is the conversion cord to connect the EC-02S (3 m) or EC-02SB

(10 m) used by conventional vibration level meter to EC-54S (3 m: supplied)

or EC-54SB (10 m).

Printer DPU-414 / BL2-58

Allows printout of measurement screen hard copy and of data stored in the

internal memory or on the SD card (printer, printer paper, connection cable

required).

The procedure for printing data measured with the VM-55 is as follows.

Turn power to the VM-55 and the printer on and set the printer to the online

state. It is assumed that the steps described in “Preparations” (starting on

page 11) have been completed.

For information on how to connect the DPU-414, how to set the baud rate,

and how to set the DIP switches of the DPU-414, refer to pages 25–27. For

information on how to connect the BL2-58 and how to set the baud rate etc.,

refer to pages 25, 26, and 28.

For details about printer operation, refer to the documentation supplied with

the printer.

EC-54S (3 m: supplied) or
EC-54SB (10 m)

EC-54ST (0.3 m)

EC-02S (3 m) or
EC-02SB (10 m)

PV-83C

Содержание VM-55













































































































































































































Результаты поиска

Содержание VM-55

Отзывы:

Rion VM-55, Инструкция по эксплуатации, Страница: 131 / 204

Результаты поиска

Содержание VM-55

Отзывы: