Rion VM-55 Скачать руководство пользователя страница 74

Страница: 74 / 204

Reading the Display

Display / I/O

This screen sets the type of output signal etc.

Use the

keys to select [Display / I/O] and press the MENU/

ENTER key. The display / I/O screen appears.

Each item of the display / I/O screen is selected using the

key.

Pressing the DISPLAY key displays explanation screen of the item that has

been selected.

Pressing the PAUSE/CONT key switches back to the menu list screen.

Pressing the START/STOP key switches back to the measurement screen.

Time-Level graph Time Scale

Displays the screen to select the time scale of the time-level graph.

Select [Time-Level graph Time Scale] and press the MENU/ENTER key.

The Time-Level graph Time Scale setting screen appears.

Use the

keys to select the time scale (20s, 1min, 2min) and press

the MENU/ENTER key.

Output

Displays the screen to select the signal output from the OUTPUT con-

nectors of the unit.

Select [Output] and press the MENU/ENTER key. The output screen

appears (see page 105).

Содержание VM-55













































































































































































































Результаты поиска

Содержание VM-55

Отзывы:

Rion VM-55, Инструкция по эксплуатации, Страница: 74 / 204

Результаты поиска

Содержание VM-55

Отзывы: