Rion VM-55 Скачать руководство пользователя страница 95

Страница: 95 / 204

Store Operation

10. Specify the store address.

The currently selected address is shown on the screen. If the address

is shown in red, it already contains data.

The

keys can be used to specify the address in the range from

0001 to 1000. Any data already present in the selected address will be

overwritten (erased and replaced by the new data). For information on

how to check existing data, see the section “Recalling stored data”.

Note

In Manual mode, no data overwrite warning will be
shown. Proceed with care, as data will be forcibly
overwritten.

11. Start a measurement. When it fi nishes, a confi rmation screen will

be displayed. Use the

keys to select “Store data” and press the

MENU/ENTER key to store the processing results.

The store process takes about 1 second. When it is completed, the

address is incremented by one step. The stored data includes the

following information: date and time when processing was started,

measurement time, conditions and processing results, overload and

under-range information, other information.

The T-L (time-level graph) display screen is not stored.

Important

Any measurement data present in the currently
displayed address will be overwritten. If the
address is shown in red, it contains data. Take
care not to accidentally overwrite data.

Address

Содержание VM-55













































































































































































































Результаты поиска

Содержание VM-55

Отзывы:

Rion VM-55, Инструкция по эксплуатации, Страница: 95 / 204

Результаты поиска

Содержание VM-55

Отзывы: