Rion VM-55 Скачать руководство пользователя страница 93

Страница: 93 / 204

Store Operation

Manual mode operation

Memory store

When an operator performs store operation on the confi rmation screen

displayed after processing fi nishes, each processed data will be stored.

If no SD memory card is inserted, the data will be stored in the internal memory

of the unit. If an SD memory card is inserted, the data will automatically be

stored on the card.

The procedure is as follows.

1. Press the POWER key to turn the unit on.

2. Press the MENU/ENTER key to bring up the menu list screen.

3. Use

the

keys to select [Store] and press the MENU/ENTER

key. The store screen appears.

4. Use

the

keys to select [Store Mode] and press the MENU/ENTER

key. The store mode settings screen appears.

5. Use

the

keys to select [Manual] and press the MENU/ENTER

key. When the optional Extended Function Program VX-55EX is not

installed, only the [Manual] can be selected.

Store screen when Manual mode is selected

Содержание VM-55













































































































































































































Результаты поиска

Содержание VM-55

Отзывы:

Rion VM-55, Инструкция по эксплуатации, Страница: 93 / 204

Результаты поиска

Содержание VM-55

Отзывы: